Aero Tech manufactures hydronic radiant ceiling panels for commercial, institutional, architectural, and specialty applications. Our aluminum radiant heating systems combine efficient heat transfer, flexible configurations, published performance data, and project-specific engineering support.
Hydronic radiant ceiling panels circulate heated water through copper tubing attached to aluminum panels. The panels transfer heat through infrared radiation to directly warm people and surfaces without relying on forced-air blowers or heavy convection currents.
The result is quiet, uniform heating that can be integrated directly into the architecture of the space.
Radiant heating provides engineers and architects with an efficient, flexible alternative to
conventional forced-air heating systems
Reduce system energy requirements while maintaining occupant comfort.
Without forced-air blowers or heavy convection currents, radiant heating minimizes the circulation of dust, pollen, and allergens.
Provide uniform heat output without noisy equipment or drafts.
Reduce heating-related ductwork requirements and integrate the heating system directly into the architecture.
Radiant panels can be designed for indoor, semi-enclosed, and select outdoor spaces.
Virtually maintenance-free radiant systems can provide reliable performance for decades.
A radiant heating system is only as good as the engineering behind it. Aero Tech combines proven panel construction, published performance data, flexible manufacturing capabilities, and project-specific support to help engineers and architects design radiant systems with confidence.
More than 70% of the copper tube surface is mechanically attached to Aero Tech’s extruded
aluminum panel, creating constant, consistent contact for effective heat transfer.
The design provides direct tube-to-panel contact without retaining clips or non-hardening heat paste.
For our RLFM panels, the entire circuit is soldered to the panel, vs attaching the tube with hardware and brackets.
This ensures more contact for efficient heat transfer.
Aero Tech formed metal radiant panels feature a continuous tube circuit that reduces the number of fittings and solder joints required within the panel.
Fewer connections create fewer potential failure points while maintaining a continuous path for water flow.
Not every building fits a standard solution.
Aero Tech’s in-house manufacturing capabilities allow radiant panel systems to be customized for unique architectural and project requirements, including:
Aero Tech works with engineers, architects, contractors, and project teams to help move radiant heating systems from design through installation.
Detailed submittal drawings help coordinate radiant panels around window mullions, columns, lighting, plumbing, and other building systems.
Get system and circuit recommendations tailored to your project’s requirements.
Panels arrive clearly labeled by room and length for easier identification and more efficient installation in the field.
Work with a dedicated Aero Tech representative who knows your project from design through installation.
Aero Tech manufactures multiple radiant panel configurations to accommodate different heating requirements, architectural conditions, and installation methods.
Linear interlocking aluminum radiant panels are designed for efficient heat transfer and installation flexibility.
Available in multiple widths and face configurations, extruded panels feature field-modifiable construction to help accommodate project-specific conditions.
Large-format aluminum radiant panels feature continuous copper tubing bonded directly to the panel.
Available in 2×2 and 2×4 sizes with standard and tegular corner configurations, perforated and non-perforated. Can also be made to accept PEX connection upon request.
Access the technical information you need to evaluate, design, specify, and install Aero Tech radiant ceiling panels.
Published Performance Data
Heating-output information by panel configuration to support system selection and calculations.
CAD Details
Access product details for use during project design and coordination.
O&M Manuals
Product information to support installation, operation, and long-term system use.
Submittal Support
Work with Aero Tech to develop project-specific panel layouts and system recommendations.
From straightforward commercial installations to highly customized architectural projects, Aero Tech radiant panel systems can be engineered for a wide range of environments.
Applications include:
Aero Tech radiant panels have been used in projects where heating performance must work alongside demanding architectural and installation requirements.
Aero Tech radiant panels were installed underneath the seating and walkways of the TKTS booth in Times Square to help keep visitors warm and support snow-melt requirements in an exposed outdoor environment.
Custom radiant panels were designed for curved and straight sections of this high-end residential project, with the system engineered around electrical boxes and architectural design requirements.
A suspended radiant ceiling system serves as the heat source throughout this glass-enclosed pedestrian bridge.
We’ve helped architects, engineers, and facilities across the U.S. design, plan, and install radiant heat systems in a variety of applications. Check out some of our favorite featured projects.
For more than 40 years, Aero Tech has brought manufacturing expertise, engineering support, and flexible fabrication capabilities to radiant heating projects.
Whether you’re evaluating radiant ceiling heating for a new building, developing specifications, coordinating a complex architectural application, or looking for technical data, Aero Tech can help.
Contact an Aero Tech representative to discuss your project, request engineering information, or determine the right radiant panel configuration for your application.
Hydronic radiant ceiling panels circulate heated water through copper tubing attached to aluminum panels. The panels transfer heat through infrared radiation to directly warm people and surfaces below rather than relying on forced-air blowers or heavy convection currents.
Radiant heating can reduce system energy requirements while maintaining occupant comfort because heat is delivered directly to surfaces and occupants without relying on forced-air blowers or heavy convection currents.
Yes. Aero Tech’s manufacturing capabilities allow radiant systems to be customized for curved surfaces, historic renovations, architectural finishes, transit applications, commercial buildings, and other specialized installations.
Yes. Aero Tech provides detailed submittal drawings to help coordinate panel layouts around window mullions, columns, lighting, plumbing, and other building systems.
Aero Tech manufactures extruded aluminum radiant panels and formed metal radiant panels. Multiple widths, sizes, face configurations, finishes, and installation options are available depending on the panel type and project requirements.
Aero Tech publishes heating-output data by panel configuration. Engineers can use this information for panel selection and system calculations using standard ASHRAE methods.
Aero Tech provides published performance data, CAD details, O&M manuals, submittal drawings, system and circuit recommendations, and technical support throughout the project.
